1015 low carbon steel balls high quality precision
The main characteristic of this kind of material 1015 carbon steel is similar to the 1010 carbon steel, (The difference is the higher percentage of the C element) consists in the heat treatment exclusively through the hardening of a superficial layer, while the hardness of the inner part of the ball does not vary. The balls of this material is economic for all those applications that do not require the use of full-hardened steel balls.
This type of steel has a great wear and load capacity but no corrosion resistance to water and chemical agent. Carbon steel balls should be plated for the outside use.
Specification
|
1015 carbon steel balls |
|
|
Diameters |
1/16’’ (1.588mm)- 50.0mm |
|
Grade |
G100-G1000 |
|
Hardness |
58/62 HRC |
|
Application |
casters, locks, drawer slides, bicycles, roller skates, slides, trolleys and conveyors. |
Equivalence Of Material
|
1015 carbon steel balls |
|
|
|
1015 |
|
AISI/ASTM(USA) |
1015 |
|
VDEh (GER) |
1.0401 |
|
JIS (JAP) |
S15C |
|
BS (UK) |
040A15 |
|
NF (France) |
- |
|
ГОСТ(Russia) |
15 |
|
GB (China) |
15 |
Chemical Composition
|
1015 carbon steel balls |
|
|
1015 |
|
|
C |
0.13% - 0.18% |
|
Mn |
0.30% - 0.60% |
|
P |
≤0.040% |
|
S |
≤0.050% |
Corrosion Resistance Chart
Hardness Comparision Chart
FAQ
Q: Do chrome steel balls perform better than carbon steel balls?
A: Chrome steel balls contain more alloy metals, which contribute toughness, hardness, resistant and are able to operate under heavy load, so are widely utilized in bearing and other industrial application. Carbon steel balls are only case-hardened. The interior part doesn’t achieve the same hardness as the surface. The application is drawer sliders, chair casters and toys.
Q: What standards do you adhere to for manufacturing?
A: Our products are in compliance with the following standards industrial for steel balls:
● ISO 3290 (INTERNATIONAL)
● DIN 5401 (GER)
● AISI/ AFBMA (USA)
● JIS B1501 (JAP)
● GB/T308 (CHN)
Q: What kind of certificates do you achieve?
A: We own ISO9001:2008 management system certification and IATF16949: 2016 automotive industry quality management system certification.
Q: Do you offer free samples for test?
A: Yes, we provide free samples to test and check quality.
Q: How long is your lead time?
A: Generally it takes around 3-5 days if the products are in stock. Or else the estimated lead time should be worked out according to your specific quantity, material and grade.
Q: We are not familiar with the international transportation. Will you handle all logistics?
A: Definitely, we deal with the logistic issues with our cooperated international freight forwarders with years’ of experience. The customers only need to provide us the basic information
Q: How is your packaging method?
A: 1. Conventional packaging method: 4 Inner boxes (14.5cm*9.5cm*8cm) per master carton (30cm*20cm*17cm) with dry plastic bag with VCI anti-rust paper or oiled plastic bag, 24 cartons per wooden pallet (80cm*60cm*65cm). Each carton weighs roughly 23kgs;
2.Steel drum packaging method: 4 steel drums (∅35cm*55cm) with dry plastic bag with VCI anti-rust paper or oiled plastic bag，4 drums per wooden pallet (74cm*74cm*55cm);
3.Customized packaging as per customer's requirement.
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Top