The main characteristic of this kind of material carbon steel 1010 consists in the heat treatment exclusively through the hardening of a superficial layer, while the hardness of the inner part of the ball does not vary. The balls of this material is economic for all those applications that do not require the use of full-hardened steel balls.
This type of steel has a great wear and load capacity but no corrosion resistance to water and chemical agent. Carbon steel balls should be plated for the outside use.
1010 carbon steel balls |
|
Diameters |
1/16’’ (1.588mm)- 50.0mm |
Grade |
G100-G1000 |
Superficial hardness |
55/62 HRC |
Application |
casters, locks, drawer slides, bicycles, roller skates, slides, trolleys and conveyors. |
1010 carbon steel balls |
|
|
1010 |
AISI/ASTM(USA) |
1010 |
VDEh (GER) |
1.1121 |
JIS (JAP) |
S10C |
BS (UK) |
040A10 |
NF (France) |
XC10 |
ГОСТ(Russia) |
10 |
GB (China) |
10 |
1010 |
|
C |
0.08% - 0.10% |
Mn |
0.30% – 0.60% |
P |
≤0.040% |
S |
≤0.050% |
CORROSION RESISTANCE CHART | ||||||||||
MATERIAL | Industrial atmospheres | Salt air | WATER | FOOD | LIQUOR | |||||
Wet steam | Domestic water | Sea water | Food products | Fruit & veg. juice | Dairy products | Hot sulfite | Dye | |||
52100 Chrome Steel | C | / | D | D | / | / | / | / | / | / |
1010/1015 Carbon Steel | D | / | / | / | / | / | / | / | / | / |
420(C)/440(C) stainless Steel | B | C | B | B | / | B | B | C | / | D |
304(L) stainless Steel | B | A | A | A | A | A | B | A | A | D |
316(L) stainless Steel | B | A | A | A | A | A | A | A | B | D |
A = Excelent B = Good C = Fair D = Poor / = Not suitable |
Q: Do chrome steel balls perform better than carbon steel balls?
A: Chrome steel balls contain more alloy metals, which contribute toughness, hardness, resistant and are able to operate under heavy load, so are widely utilized in bearing and other industrial application. Carbon steel balls are only case-hardened. The interior part doesn’t achieve the same hardness as the surface. The application is drawer sliders, chair casters and toys.
Q: What kind of certificates do you achieve?
A: We own ISO9001:2008 management system certification and IATF16949: 2016 automotive industry quality management system certification.
Q: Do you offer free samples for test?
A: Yes, we provide free samples to test and check quality.
Q: How long is your lead time?
A: Generally it takes around 3-5 days if the products are in stock. Or else the estimated lead time should be worked out according to your specific quantity, material and grade.
Q: How is your packaging method?
A: 1. Conventional packaging method: 4 Inner boxes (14.5cm*9.5cm*8cm) per master carton (30cm*20cm*17cm) with dry plastic bag with VCI anti-rust paper or oiled plastic bag, 24 cartons per wooden pallet (80cm*60cm*65cm). Each carton weighs roughly 23kgs;
2.Steel drum packaging method: 4 steel drums (∅35cm*55cm) with dry plastic bag with VCI anti-rust paper or oiled plastic bag,4 drums per wooden pallet (74cm*74cm*55cm);
3.Customized packaging as per customer’s requirement.
We obtained the Certificate of Quality Management systems ISO9001:2008 and Quality Management System specification for the automotive industry IATF 16949:2016. 11 national utility patents both for steel ball technics and manufacturing machine have been granted.
Since the establishment, We have consistently adhered to the principle of quality assurance, and put the quality of products in the most important position. A complete management system is established. Especially the inspection and tracking system from raw materials to finished products.